RX200 S5 Operating Manual 81
CSS components Hot-plug components
8.1.1.2 Installing the hot-plug power supply unit
Figure 17: Installing the power supply unit
Ê Slide the new power supply unit into the empty slot until it clicks into place.
I Make sure that the power supply unit engages correctly in the slot and
is locked in position.
This is the only way to prevent the power supply unit from sliding out
of its mountings and being damaged during transportation.
Ê Connect the newly installed power supply unit (see section "Connecting the
server to the mains" on page 52).
To Next Page
Loading...
