Fujitsu PRIMERGY RX200 S5 User Manual

10 Operating Manual RX200 S5
Features Preface
1.3 Features
Customer Self Service (CSS)
The Fujitsu Technology Solutions Customer Self Service (CSS) concept
enables you to identify and replace the affected component yourself in the case
of certain error scenarios.
In the CSS concept, you can replace the following components yourself in the
event of an error:
– Hot-plug hard disk drives
– Hot-plug power supply units
– Hot-plug system fan
– Memory modules
– expansion cards
For information on replacing these components, see chapter "CSS
components" on page 79.
CSS indicators on the control panel and on the back of the PRIMERGY server
provide you with information if a CSS event arises (for more information on the
behavior of these indicators, see chapter "Starting up and operation" on
page 55 and the "PRIMERGY ServerView Suite Local Service Concept - LSC"
manual on the PRIMERGY ServerView Suite DVD 2).
In addition, CSS errors are displayed in the ServerView Operations Manager -
the server management software from Fujitsu Technology Solutions.
In the event of errors, the ServerView Operations Manager refers you directly to
the affected component and its order information in the Illustrated Spares
catalog of the server in question.
System board
The features of the system board are described in the technical manual for the
system board D2786 for the hardware and in the BIOS Setup manual for the
firmware.

Fujitsu PRIMERGY RX200 S5 Specifications

General

Tcase	76 °C
Bus type	QPI
Stepping	D0
FSB Parity	No
Processor code	SLBF9
Processor cache	4 MB
Processor cores	4
Processor model	E5504
System bus rate	4.8 GT/s
Processor series	Intel Xeon 5500 Series
Processor socket	Socket B (LGA 1366)
Processor codename	Nehalem EP
Motherboard chipset	Intel® 5500
Number of QPI links	2
Processor frequency	2 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	42.5 x 45 mm
Processor front side bus	- MHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Thermal Design Power (TDP)	80 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	15
Memory types supported by processor	DDR3-SDRAM
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800 MHz
Memory bandwidth supported by processor (max)	19.2 GB/s
Maximum internal memory supported by processor	144 GB
HDD size	2.5 \
Total storage capacity	0 GB
Internal memory	4 GB
Memory clock speed	1066 MHz
Maximum internal memory	96 GB
Memory layout (slots x size)	2 x 2 GB
Networking features	Gigabit Ethernet
Expansion slots	1x PCI-Express 2 x4 2x PCI-Express 2 x8
PS/2 ports quantity	0
USB 2.0 ports quantity	7
Ethernet LAN (RJ-45) ports	3
Power supply	459 W
Power requirements	100 - 127 V / 200 - 240 V
Power supply input frequency	50 - 60 Hz
Compatible operating systems	Microsoft Windows Server 2008 Microsoft Windows Server 2003 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Citrix XenServer VMware Infrastructure VMware vSphere 4.0
Chassis type	Rack (1U)
Operating temperature (T-T)	15 - 35 °C
Operating relative humidity (H-H)	10 - 85 %
Certification	CE, CB, RoHS, WEEE
Processor ARK ID	40711

Weight and Dimensions

Depth	765 mm
Width	431 mm
Height	43 mm