Need help?Do you have a question about the Fujitsu PRIMERGY RX2540 M6 and is the answer not in the manual?
General| Memory Slots | 32 DIMM slots |
|---|---|
| Form Factor | 2U rack server |
| Processor | Intel Xeon Scalable Processors (3rd generation) |
| Storage | Up to 24 x 2.5" or 12 x 3.5" drives |
| RAID Support | RAID 0, 1, 5, 6, 10 |
| Network | 4 x 1GbE ports (onboard), optional 10/25GbE |
| Power Supply | 800 W, 1200 W, 1600 W |
| Expansion Slots | Up to 8x PCIe Gen4 slots |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
| Management | iRMC S5 |
Defines the manual's scope and intended readers for server setup and operation.
Explains symbols and text formatting used throughout the manual for clarity.
Crucial safety instructions and warnings before operating the server.
Information on where to find all relevant manuals and documentation for the server.
Details the physical layout and configurations of the server's front and rear.
Highlights important functionalities like CSS, TPM, PSU, Thermal Design, and remote management.
Identifies and describes front and rear panel connectors, buttons, and status LEDs.
Comprehensive safety guidelines for server installation, operation, and maintenance.
Covers environmental conditions, power connections, and general operational rules.
Details on ESD protection, server transport, and rack installation procedures.
Steps for unpacking, installing, connecting, and initial configuration of the server.
Detailed procedures for mounting the server into a rack system.
Instructions for connecting power cords and various data/peripheral cables.
Methods for configuring the server using ServerView Installation Manager or manually.
Procedures for removing and installing the server's front cover.
Instructions for switching the server on, off, and other power management options.
Guides for installing 3.5-inch, 2.5-inch, and EDSFF SSD modules.
Steps for adding a redundant power supply unit to the server.
Guidance on initial steps for diagnosing and resolving faults.
Solutions for problems like no power indication, boot failures, blank screens, and server shutdowns.
Troubleshooting for input devices, time/date, drive errors, and ODD problems.
Details on system board, CPU, memory configuration, and interfaces.
Information on onboard controllers, RAID options, and available PCIe expansion slots.
Data on ambient conditions, noise levels, and electrical values for AC/DC/HVDC PSUs.
Details on warranty regulations and how to access them online.
Provides online access to local service partner telephone numbers.
To Next Page
