Need help?Do you have a question about the Fujitsu PRIMERGY RX2510 M2 and is the answer not in the manual?
General| Number of Processors | 1 or 2 |
|---|---|
| Memory Type | DDR4 |
| Chipset | Intel C610 |
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
| Form Factor | Rack |
| Processor | Intel Xeon E5-2600 v4/v3 |
| Memory Slots | 16 DIMM slots |
| Storage | Up to 4 x 3.5-inch SAS/SATA |
| RAID Controller | Optional |
| Network | 2 x 1 GbE onboard, optional 10 GbE or Fibre Channel cards |
| Power Supply | Redundant power supplies |
| Management | iRMC S4 (integrated Remote Management Controller) |
| Operating System Support | Windows Server, Linux, VMware |
Important safety information for correct and safe product usage.
Information on using the server in commercial/industrial areas and high safety risks.
Details on the integrated remote management controller for server control.
Critical safety guidelines to follow before and during server installation.
Methods for configuring the server and installing the operating system.
General safety precautions for working with the server and its components.
Procedures for powering the server on, off, and handling power overrides.
Using BIOS Setup options to protect server data from unauthorized access.
Troubleshooting steps when the server fails to boot after hardware changes.
To Next Page