Fujitsu PRIMERGY RX2510 M2 - Control Elements; Indicators on the Control Panel

50 Operating Manual RX2510 M2
Starting up and operation
6.1.1.1 Control elements
6.1.1.2 Indicators on the control panel
Pos. Symbol Button Function
1 RST
Reset
button
This button is used to reboot the system. It can be
pressed using the end of a paper clip.
V CAUTION!
Risk of data loss!
2 NMI
NMI
button
This button is used to troubleshoot software and
device driver errors. It can be pressed using the
end of a paper clip.
V CAUTION!
Use this button only if directed to do so by
qualified certified maintenance personnel!
3 ID ID button
This button highlights the ID indicator on the front
and I/O panels for easy server identification.
7
On / Off
button
This button is used to switch the server on or off.
I If the system is running an ACPI-compliant
operating system, pressing the On / Off
button will perform a graceful shutdown.
Pos. Symbol Indicator Status Description
3 ID ID indicator
blue on
server has been highlighted using
ServerView Operations Manager,
iRMC web frontend or the ID button
on the front panel for easy
identification
blue
flashing
server has been highlighted using
IRMC (AVR) when local VGA off for
easy identification