Need help?Do you have a question about the Fujitsu PRIMERGY RX2540 M2 and is the answer not in the manual?
General| Processor series | Intel Xeon E5-2600 v4 |
|---|---|
| Processor socket | LGA 2011-v3 |
| Built-in processor | No |
| Motherboard chipset | Intel® C612 |
| Compatible processor series | Intel® Xeon® E5 Family |
| Number of processors supported | 2 |
| ECC | Yes |
| Number of DIMM slots | 24 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 3072 GB |
| Hot-swap HDD bays | - |
| Storage drive sizes supported | 3.5 \ |
| Supported storage drive types | HDD & SSD |
| Number of storage drives supported | 12 |
| USB 2.0 ports quantity | 3 |
| Ethernet LAN (RJ-45) ports | 4 |
| Ethernet interface type | Gigabit Ethernet |
| PCI Express slots version | 3.0 |
| Chassis type | Rack (2U) |
| Product color | Black |
| Operating temperature (T-T) | 5 - 45 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Depth | 770 mm |
|---|---|
| Width | 482.4 mm |
| Height | 86.6 mm |
| Weight | 25000 g |
Categorizes maintenance tasks by difficulty and required qualification levels.
Provides critical safety guidelines before installing, operating, or maintaining the server.
Explains how to use diagnostic tools to identify server and component issues.
Procedures for accessing internal server components for maintenance tasks.
Covers initial software steps before maintenance, such as suspending BitLocker.
Covers post-maintenance software steps, including BIOS updates and system verification.
Step-by-step guide for installing hot-plug power supply units without system interruption.
Procedure for replacing a defective hot-plug power supply unit.
Step-by-step guide for installing expansion cards into PCIe slots.
Step-by-step guide for installing memory modules into the server.
Step-by-step guide for installing CPUs into the socket.
Procedures for replacing the entire system board.
To Next Page