510 Upgrade and Maintenance Manual RX2540 M2
Front panel and external front connectors
13.9.2 Replacing the ID card holder
13.9.2.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 95
Ê "Locating the defective server" on page 61
Ê "Shutting down the server" on page 65
Ê "Disconnecting the power cord" on page 66
Ê If applicable, "Removing 2.5-inch HDD/SSD modules" on page 197.
Ê "Getting access to the component" on page 68
Ê "Removing the fan box" on page 397
Ê Remove the backplane 3 see "Removing the backplane" on page 203.
13.9.2.2 Removing the ID card holder
Ê Remove the ID card, see figure 438 on page 578.
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: tool-less
To Next Page
Loading...
