Fujitsu PRIMERGY RX2540 M2

RX2540 M2 Upgrade and Maintenance Manual 597
Appendix
16.3.3.3 Indicators on PSUs (slide-in units)
Figure 449: PSU status indicator
Pos. Indicator Status Description
1
PSU status
indicator
green flashing The server is switched off, but mains
voltage is present (standby mode).
green on The server is switched on and operating
properly.
orange
flashing
An overload has been detected. The PSU
is still running, but failure might be
imminent.
orange on
An PSU failure has been detected.
Possible causes:
– Over/under voltage
– Overheating
– Fan failure
0