202 Upgrade and Maintenance Manual RX2540 M2
Hard disk drives (HDD) and solid state drives (SSD)
Ê Remove all HDD/SSD modules from the server as described in section
"Removing 2.5-inch HDD/SSD modules" on page 197.
V CAUTION!
Ensure that all HDDs are uniquely identified so that you can reinsert
them into their original bays after replacing the HDD backplane.
Ê "Getting access to the component" on page 68
Ê "Removing the fan box" on page 397
Ê If applicable, "Removing the SAS expander holder" on page 219.
7.5.1.2 Disconnecting cables from backplane
Figure 100: Disconnecting cables from backplane 1 (model without SAS expander board)
To Next Page
Loading...
