RX2540 M2 Upgrade and Maintenance Manual 315
Expansion cards and backup units
8.7.2.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 96
Ê "Shutting down the server" on page 65
Ê "Disconnecting the power cord" on page 66
Ê "Getting access to the component" on page 68
8.7.2.2 Installing TFM to the RAID controller
I To connect an FBU to the controller you need a TFM.
Figure 208: Preparing the TFM (A)
Ê Insert the screws into the bolts.
I Leave the distance of the thickness of the TFM between screw head
and bolt.
Ê Push the bolt with the screw in the recesses of the TFM.
To Next Page
Loading...
