RX2540 M2 Upgrade and Maintenance Manual 389
10.5.4.2 Applying thermal paste
Ê Apply thermal paste to the CPU surface as described in section "Applying
thermal paste" on page 390.
I If the CPU upgrade or replacement kit contains a new CPU heat sink,
a thin layer of thermal compound has already been pre-applied to its
lower surface. In this case, please proceed with section "Installing the
heat sink" on page 386.
10.5.4.3 Installing the CPU heat sink
Ê Install the CPU heat sink as described in sections "Preparing the heat sink
and CPU" on page 385 and "Installing the heat sink" on page 386.
10.5.5 Concluding steps
Ê "Reassembling" on page 73
Ê "Connecting the power cord" on page 79
Ê "Switching on the server" on page 82
To Next Page
Loading...
