360 Upgrade and Maintenance Manual RX2540 M2
Ê "Shutting down the server" on page 65.
Ê "Disconnecting the power cord" on page 66
Ê "Getting access to the component" on page 68
9.4.2 Removing the defective memory module
Ê Remove the defective memory module as described in section "Removing a
memory module" on page 358.
9.4.3 Installing a new memory module
Ê Install memory module as described in section "Installing a memory module"
on page 357.
9.4.4 Concluding steps
Ê "Reassembling" on page 73
Ê "Connecting the power cord" on page 79
Ê "Updating or recovering the system board BIOS and iRMC" on page 103
Ê "Switching on the server" on page 82
Ê "Resetting the error status after replacing memory modules or processors"
on page 111
Ê "Enabling SVOM boot watchdog functionality" on page 114
Ê "Enabling replaced components in the system BIOS" on page 115
Ê "Verifying the memory mode" on page 115
Ê "Resuming BitLocker functionality" on page 120
To Next Page
Loading...
