RX2540 M2 Upgrade and Maintenance Manual 37
2.3 Tools you need at hand
When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
List of used screws for global market
Screw driver /
nut driver /
bit insert
torque
Screw Usage Screw type
Phillips PZ2
Nut 5 mm
0.6 Nm
HDD
backplane,
Multibay and
Panelhousing
Slot bracket
to chassis,
Slot bracket
to riser
Fan box
Riser module
Hexagonal cross
M3 x 4.5 mm
(silver)
C26192-Y10-C67
Phillips PZ2
Nut 5 mm
0.6 Nm
System
board,
Riser card
Front panel in
2.5-inch HDD
version
Hexagonal cross
M3 x 6 mm
(silver)
C26192-Y10-C68
Phillips PH1
0.6 Nm
3.5-inch HDD Cross
6-32 UNC x 4 mm
C26192-Y10-
C200
Table 2: List of required tools and used screws
To Next Page
Loading...
