Fujitsu PRIMERGY RX2540 M2

RX2540 M2 Upgrade and Maintenance Manual 359
Main memory
Figure 248: Removing memory modules (B)
Ê Remove the ejected memory module.
9.3.3 Concluding steps
Ê "Reassembling" on page 73
Ê "Connecting the power cord" on page 79
Ê "Updating or recovering the system board BIOS and iRMC" on page 103
Ê "Switching on the server" on page 82
Ê "Enabling SVOM boot watchdog functionality" on page 114
Ê "Resuming BitLocker functionality" on page 120
9.4 Replacing memory modules
9.4.1 Preliminary steps
Ê "Locating the defective server" on page 61
Ê Identify the defective memory slot using the server management software.
Ê "Suspending BitLocker functionality" on page 95
Ê "Disabling SVOM boot watchdog functionality" on page 96
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: tool-less