600 Upgrade and Maintenance Manual RX2540 M2
16.5 Minimum startup configuration
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
Setting Status Description
1
JP1
JP2
PWD CLR/
BIOS-RCVR
Default: Password delete and
Recovery BIOS options disabled
Password skip enabled
This jumper setting will
permanently delete the current
BIOS password and apply default
BIOS settings.
Recovery BIOS enabled
3JP3
BIOS Flash
Write Protect
Default
Flash write protect enable
Field Replaceable Unit
(FRU)
To Next Page
Loading...
