Fujitsu PRIMERGY RX2540 M2

RX2540 M2 Upgrade and Maintenance Manual 139
Power supply unit (PSU)
6.3.4 Installing a dummy cover
Figure 41: Installing a dummy cover
Ê Insert the dummy cover into the empty bay with the impressed arrow symbol
facing up (see circle).
Ê Press in on both release latches on the dummy cover until it locks in place.
V CAUTION!
Always install dummy covers into unused bays to comply with
applicable EMC regulations and satisfy cooling requirements.
6.3.5 Concluding steps
Ê "Connecting the power cord" on page 79