282 Upgrade and Maintenance Manual RX2540 M2
Expansion cards and backup units
8.5.6.4 Connecting cables to the expansion card
Ê If applicable, connect internal cables to the expansion card.
I For a complete cabling overview, please refer to section "List of used
cables" on page 559.
8.5.6.5 Connecting a battery backup unit to the expansion card
Ê If applicable, connect an FBU cable to the expansion card as described in
section "Connecting the FBU to the RAID controller" on page 318.
8.5.6.6 Concluding steps
Ê "Reassembling" on page 73
Ê Connect all external cables to the replaced expansion cards.
Ê "Connecting the power cord" on page 79
Ê "Switching on the server" on page 82
Ê "Enabling replaced components in the system BIOS" on page 115
Ê If applicable,"Updating RAID controller firmware" on page 106.
Ê "Enabling SVOM boot watchdog functionality" on page 114
Ê "Resuming BitLocker functionality" on page 120
To Next Page
Loading...
