258 Upgrade and Maintenance Manual RX2540 M2
Expansion cards and backup units
Ê If applicable, "Updating RAID controller firmware" on page 106.
Ê If applicable, "Enabling Option ROM scan" on page 107.
Ê "Enabling SVOM boot watchdog functionality" on page 114
Ê "Resuming BitLocker functionality" on page 120
8.4.2 Removing expansion cards
8.4.2.1 Preliminary steps
Ê "Locating the defective server" on page 61
Ê "Suspending BitLocker functionality" on page 95
Ê "Disabling SVOM boot watchdog functionality" on page 96
Ê "Shutting down the server" on page 65
Ê Remove all external cables from the expansion card to be removed.
Ê "Disconnecting the power cord" on page 66
Ê "Getting access to the component" on page 68
8.4.2.2 Removing an expansion card
Ê If applicable, disconnect internal cables from the expansion card.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver / nut driver 5 mm
To Next Page
Loading...
