RX2540 M2 Upgrade and Maintenance Manual 299
Expansion cards and backup units
8.6.2.7 Concluding steps
Ê "Reassembling" on page 73
Ê "Connecting the power cord" on page 79
Ê "Switching on the server" on page 82
Ê "Resuming BitLocker functionality" on page 120
8.6.3 Installing a GPGPU card in riser module 2
8.6.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 95
Ê "Disabling SVOM boot watchdog functionality" on page 96
Ê "Shutting down the server" on page 65
Ê "Disconnecting the power cord" on page 66
Ê "Getting access to the component" on page 68
8.6.3.2 Removing the slot cover from the riser card holder
Ê Remove the slot cover from the riser card holder as described in section
"Removing the slot cover from the riser card holder" on page 284.
8.6.3.3 Installing a riser card
Ê Install the riser card as described in section "Installing a riser card with one
PCIe slot Gen3 x16" on page 285.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: side cutter
Phillips PH2 / (+) No. 2 screw driver / nut driver 5 mm
To Next Page
Loading...
