Need help?Do you have a question about the Fujitsu PRIMERGY RX2540 M7 and is the answer not in the manual?
General| Form Factor | 2U rack server |
|---|---|
| Processor | Intel Xeon Scalable Processors |
| Storage | Up to 24 x 2.5-inch drives or 12 x 3.5-inch drives |
| RAID | Integrated RAID controller with support for RAID 0/1/5/6/10/50/60 |
| Network | optional 10/25GbE |
| Power Supply | Redundant power supplies; 800W, 1300W, or 1600W |
| Expansion Slots | Up to 8 x PCIe slots |
| Operating System Support | Windows Server, Red Hat, SUSE, VMware |
Critical safety guidelines for server installation, operation, handling, and environmental considerations.
Guidance on utilizing diagnostic tools and indicators to locate defective servers and components.
Safety precautions for handling and installing Power Supply Units (PSUs), including hot-plug procedures.
Safety precautions for handling and installing HDDs/SSDs, including data backup and static discharge.
Safety precautions for handling expansion cards, circuit boards, and ESD-sensitive devices.
Safety guidelines for handling memory modules, including installation, removal, and potential hazards.
Safety precautions for handling CPUs, including electrostatic discharge, thermal paste, and socket contact inspection.
Step-by-step guide for installing a second CPU, including heat sink mounting and torque specifications.
Procedure for replacing a CPU or heat sink, including thermal paste application and torque settings.
Safety guidelines for installing and handling accessible drives, including cable management and ESD precautions.
Safety guidelines for working with system boards, components, and ESD precautions.
Procedures for replacing the system board, including firmware restore and BIOS settings.
To Next Page