EasyManua.ls Logo

Fujitsu PRIMERGY RX2540 M7

Fujitsu PRIMERGY RX2540 M7
646 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
17.5 iRMC microSD card
17.5.1
Note for embedded Lifecycle Management (eLCM)
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key from user purchase order and activated through the iRMC
web interface.
For more information, see the “ServerV
iew embedded Lifecycle
Management (eLCM)” user guide.
17.5.2 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screwdriver (for cover 2)
Preliminary steps
If applicable, "Removing the front cover with lock" on page
49.
"Shutting down the server" on page 50.
"Disconnecting the power cord" on page 50.
"Getting access to the component" on page 55.
If applicable, remove the expansion card from slot 5 and slot 6, see
"Removing an expansion card" on page 278.
System board and components
504 Upgrade and Maintenance Manual RX2540 M7

Table of Contents

Related product manuals