Figure 19: Securing the power cord with the hook-and-loop tape (B)
▶
Secure the mains connector of the power cord with the hook-and-loop tape.
4.7.2
Connecting the power cord (DC PSU)
Example DC PSU -48 V
CAUTION
The DC PSU adjusts automatically to any mains voltage in the range
from -40.5 V - -57 V
.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
Basic hardware procedures
68 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
