Fujitsu PRIMERGY RX2540 M7 User Manual

18.3 Onboard settings
PCH
external connectors
INDICATE
CSS
TPM
Slot 2 (CPU 1) Riser slot 1
Battery
SATA
0-3
Slot 1 (CPU 1)
Slot 8 (CPU 2) Riser slot 2
Rear Serial
SATA 4-7
SATA
ODD
USB 3.0
JP3
1
JP2 JP1
1
2
MICRO
SD
HDD LED3
Slot 7 (CPU 2)
Slot 6 (CPU 2)
Slot 5 (CPU 2)
OCP 3.0 Slot
CPU 2
SMB3
FAN6_SYS
Clear RTC
iRMC
S6
FRONT VGA
REAR VGA
PWR 4
PWR 3
PWR 2
FAN5_SYS
FAN4_SYS
FAN3_SYS
FAN2_SYS
MCI08
MCI07
MCI06
MCI05
MCI04
MCI03
MCI02
MCI01
CPU 1
DIMM-2L
DIMM-1K
DIMM-2K
DIMM-1
DIMM-2
DIMM-1D
DIMM-2D
DIMM-1C
DIMM-2C
DIMM-1B
DIMM-2B
DIMM-1A
DIMM-2A
DIMM-2N
DIMM-1N
DIMM-2P
DIMM-1P
DIMM-2Q
DIMM-1Q
DIMM-2R
DIMM-1R
DIMM-2E
DIMM-1E
DIMM-2F
NC-SI
HDD LED1
PWR M2
* Shared LAN (top)
Management LAN
(bottom)
VROC
HDD LED2
INTERPOSER 1
Thermal Sensor
J
J
2x USB 3.0
and VGA
2x LAN *
Slot riser card
Riser card
GPGPU Riser
Slot 9
Slot riser card
Riser card
Slot 9
Slot 10
or
Riser card
GPGPU Riser
Slot 3
Riser card
Slot 3
Slot 4
or
Figure 370: Position Jumper D3983
Jumper Status Description
JP1/JP2
Default (place to keep the jumper)
Password
Skip (JP1)
Password Skip enabled
This jumper setting will permanently
delete the current BIOS password and
apply default BIOS settings.
Recovery
BIOS (JP2)
Recovery BIOS enabled
JP3 BIOS WP
Default
BIOS Flash Write Protect enabled
Appendix A
RX2540 M7 Upgrade and Maintenance Manual 555

Fujitsu PRIMERGY RX2540 M7 Specifications

General

Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors
Storage	Up to 24 x 2.5-inch drives or 12 x 3.5-inch drives
RAID	Integrated RAID controller with support for RAID 0/1/5/6/10/50/60
Network	optional 10/25GbE
Power Supply	Redundant power supplies; 800W, 1300W, or 1600W
Expansion Slots	Up to 8 x PCIe slots
Operating System Support	Windows Server, Red Hat, SUSE, VMware