Concluding steps
▶
If applicable, "Switching on the server" on page
71.
▶
If applicable, "Installing the front cover with lock" on page 71.
▶
If applicable, rescan available devices from your operating system.
7.6.6 Removing 2.5-inch PCIe SSD modules
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: tool-less
If the PCIe SSD module is controlled by a RAID controller of the PRAID
EP5x0i family
, the PCIe SSD module can be installed during operation
(hot-plug), see "Removing 2.5-inch HDD/SSD modules" on page 180.
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page
49.
▶
Identify the physical location of the PCIe SSD module, see "Overview of
configurations" on page 165.
▶
Prepare the removing of the PCIe SSD module.
▶
Depending on your OS: "Shutting down the server" on page 50.
Hard disk drive (HDD) / solid state disk (SSD)
188 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
