EasyManua.ls Logo

Fujitsu PRIMERGY RX2540 M7

Fujitsu PRIMERGY RX2540 M7
646 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
"Setting boot priority" on page
120.
Check the settings of the ODD in the BIOS and iRMC S6 web interface.
"Resuming BitLocker functionality" on page 107.
13.3.5 Installing the ODD (3.5-inch chassis)
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Torx Plus 6 screw driver (not valid for Japan)
Phillips PH1 / (+) No. 1 screw driver (Japan)
Preliminary steps
"Suspending BitLocker functionality" on page
89.
If applicable, "Removing the front cover with lock" on page 49.
"Shutting down the server" on page 50.
"Disconnecting the power cord" on page 50.
"Getting access to the component" on page 55.
"Removing the fan cage" on page 76.
Accessible drives
402 Upgrade and Maintenance Manual RX2540 M7

Table of Contents

Related product manuals