Resetting the boot retry counter in the BIOS
▶
Enter the BIOS.
▶
Select the Management menu.
▶
Under Boot Retry Counter press the [+] or [-]
keys to specify the maximum
number of boot attempts (0 to 7).
▶
Exit the BIOS.
Resetting the boot retry counter using iRMC S6 web interface
▶
Enter the iRMC S6 web interface.
▶
Select the Server Management menu.
▶
The following boot retry counter settings are available under ASR&R
Options:
▶
Under Retry counter max specify the maximum number of attempts to
boot the OS (0 to 7).
▶
Under Retry counter the current number of remaining boot attempts is
displayed. Overwrite this value with the maximum number of boot
attempts specified above in order to reset the boot retry counter.
▶
Click Apply for the changes to take effect.
For more information on iRMC settings, see the iRMC user guides.
5.3.6 Enabling the boot watchdog
If the boot watchdog has been disabled for firmware upgrade purposes (see
"Disabling the boot watchdog" on page
90), it has to be re-enabled to complete
the maintenance task.
Timer settings can be configured in the BIOS or using the iRMC S6 web
interface.
Basic software procedures
RX2540 M7 Upgrade and Maintenance Manual 101
To Next Page
Loading...
