Concluding steps
▶
"Installing the crossbar" on page
84.
▶
"Installing the fan cage" on page 77.
▶
"Installing the air duct" on page 79.
▶
Install all riser modules, see "Installing a riser module" on page 74.
▶
"Reassembling" on page 59.
▶
If applicable, install the OCP module, see "Installing an OCP module" on
page 262.
▶
Install all PSUs, see "Installing a hot-plug PSU" on page 126.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
17.4.5 Replacing the TPM
Field Replaceable Unit
(FRU)
Hardware: 35 minutes
System board and components
RX2540 M7 Upgrade and Maintenance Manual 501
To Next Page
Loading...
