EasyManua.ls Logo

Fujitsu PRIMERGY RX2540 M7

Fujitsu PRIMERGY RX2540 M7
646 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see "Documentation overview" on
page 29.
Concluding steps
If applicable, "Installing the front cover with lock" on page
71.
7.6.3 Removing 2.5-inch HDD/SSD modules
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
If applicable, "Removing the front cover with lock" on page 49.
If the HDD/SSD module to be removed is combined into a RAID array,
please proceed as follows:
Hard disk drive (HDD) / solid state disk (SSD)
180 Upgrade and Maintenance Manual RX2540 M7

Table of Contents

Related product manuals