▶
"Installing the fan cage" on page
77.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
7.8.6 Removing the M.2 interposer board
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page 47.
▶
If applicable, "Removing the front cover with lock" on page 49.
▶
"Shutting down the server" on page 50.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 55.
▶
"Removing the air duct" on page 80
▶
"Removing the fan cage" on page 76.
▶
If applicable, remove the riser module 2, see "Removing a riser module" on
page 72.
▶
If applicable, "Removing the SAS expander board holder" on page 208.
Hard disk drive (HDD) / solid state disk (SSD)
222 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
