▶
"Shutting down the server" on page
50.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 55.
▶
"Removing the fan cage" on page 76.
Removing the SAS expander board holder
▶
Disconnect all cables from the SAS expander board.
Figure 104: Removing the SAS expander board holder
▶
Remove the two screws (see circles).
▶
Push the SAS expander board holder in direction of the arrow until the guide
pin disengages.
▶
Remove the SAS expander board holder
.
Hard disk drive (HDD) / solid state disk (SSD)
208 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
