10.3 Installing memory modules
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center
.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
89.
▶
If applicable, "Removing the front cover with lock" on page 49.
▶
"Shutting down the server" on page 50.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 55.
▶
"Removing the air duct" on page 80.
Selecting the memory slot
▶
Choose the memory slot according to the configuration rules, see "Basic
information" on page 332.
Removing the memory dummy module
▶
If applicable, remove a dummy module, see "Removing a memory dummy
module" on page 347.
Main memory
RX2540 M7 Upgrade and Maintenance Manual 341
To Next Page
Loading...
