2.1.3 Configuration Thermal Design (CTD)
The CTD option allows you to operate the system with a temperature range
from 5
°C to 30 °C with corresponding configurations.
PRIMERGY servers are designed for the usage with operating
temperatures of up to 35
°C. There could be configurations that are not
able to work within this normal operation class. Please refer to
Datasheet and Fujitsu WebArchitect ( www.fujitsu.com/configurator/
public) to obtain detailed information on the corresponding
configurations.
This option can only be ordered from the manufacturer and is
indicated by the respective logo on the identification rating
plate.
CAUTION
▶
In a system that is configured with CTD, only certain components
which support the respectively decreased lower operating
temperature range may be installed and used. For applicable
restrictions, see the of
ficial configurator tool.
2.1.4 Installing optional components
The operating manual of your server gives an introduction to server features
and provides an overview of available hardware options.
Use the Fujitsu ServerV
iew Suite management software and the iRMC S6 web
interface to prepare hardware expansions. For more information about
ServerView Suite documentation, see "Documentation overview" on page 29.
Please see the following ServerView Suite topics:
–
Operation
–
Virtualization
–
Maintenance
–
Out-Of-Band Management
Before you start
22 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
