382 Upgrade and Maintenance Manual RX2540 M2
– Remove the desired CPU as described in section "Removing a CPU" on
page 374.
– Install the new CPU as described in section "Installing the CPU" on
page 363.
10.4.3 Concluding steps
Ê "Installing CPU heat sinks" on page 383
Ê "Reassembling" on page 73
Ê "Connecting the power cord" on page 79
Ê If applicable, "Updating or recovering the system board BIOS and iRMC" on
page 103
Ê "Switching on the server" on page 82
Ê "Enabling SVOM boot watchdog functionality" on page 114
Ê "Enabling replaced components in the system BIOS" on page 115
Ê "Resetting the error status after replacing memory modules or processors"
on page 111
Ê "Resuming BitLocker functionality" on page 120
To Next Page
Loading...
