RX2510 M2 Operating Manual 27
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, carefully read the safety instructions in "Important information" on
page 29.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 42).
Ê Make sure that you have all necessary manuals (see "Documentation
overview" on page 10); print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Mount the server into the rack (see "Installing/removing the server in/from
the rack" on page 43).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 44 and "Notes on connecting/disconnecting cables" on
page 47.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 46).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Control elements and indicators" on page 49).