Fujitsu PRIMERGY RX2510 M2 - Indicators on the Components

54 Operating Manual RX2510 M2
Starting up and operation
6.1.1.4 Indicators on the components
Indicators on the hot-plug HDD/SSD module
Figure 7: Indicators on the hot-plug HDD/SSD module
Pos. Indicator Status Description
1
HDD/SSD
BUSY
off HDD/SSD inactive
green on
HDD/SSD in active phase (drive active,
drive being accessed)
2
HDD/SSD
FAULT
off no HDD/SSD error
orange on
HDD/SSD faulty or rebuild stopped
(drive defective/needs replacing, a
rebuild process was stopped or the
HDD/SSD module is not correctly
inserted)
orange slow
flashing
HDD/SSD rebuild (the data is being
restored after changing a drive)