NMI button (4)
Used to troubleshoot software and device driver errors. Press the NMI button
with a straightened end of a paper clip.
CAUTION
▶
Use this button only if directed to do so by qualified certified
maintenance personnel.
3.3.1.3 Indicators on the server front
Indicators on the COP
Figure 12: Indicators on the COP
1 ID indicator
2 Power-on indicator / AC connected
indicator
3 CSS indicator
4 Global Error indicator
5 HDD/SSD activity indicator
ID indicator (1)
See also "iRMC-related status signals" on page
36.
Product description
34 Operating Manual RX2540 M6
To Next Page
Loading...
