Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
https://www.fujitsu.com/global/support/products/computing/servers/
primergy/drivers/
For Japan:
https://www.fmworld.net/cgi-bin/drviasearch/drviaindex.cgi
https://www.fujitsu.com/jp/products/computing/servers/primergy/
downloads/
5.10.2 Notes on onboard SATA controllers
The controller has its own configuration utility. For more information, see
the “Intel V
irtual RAID on CPU (Intel VROC) User Guide” at https://
support.ts.fujitsu.com/IndexQuickSearchResult.asp?q=vroc.
In the BIOS the onboard SATA controller can be configured as RAID
(default) or non-RAID.
5.10.3 Notes on SAS/SATA RAID controllers
A separate utility is available to the controller for MegaRAID
configuration. For more information, see the "SAS Software User
’s
Guide" available online at https://support.ts.fujitsu.com/.
More information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" available online at https://
support.ts.fujitsu.com/.
5.11 Note on operating system
Open the W
indows operating system / Restoring the preinstalled
environment
For the procedure to open the Windows operating system or to restore the
preinstalled environment, see the manuals on the Fujitsu manual download site
Starting up
RX2540 M6 Operating Manual 81
To Next Page
Loading...
