Cause Troubleshooting
Expansion cards or
onboard devices
not recognized
▶
Reinstall the drivers for the expansion cards or
onboard devices that are not recognized.
Various HDD/SSD error messages may occur when the system is rebooted.
These error messages are caused by modifications in the selected RAID
configuration.
Cause Troubleshooting
RAID controller
configuration
incorrect
▶
Check and correct the settings for the drives using
the RAID controller configuration program.
For more information, see the "Integrated RAID
for SAS User
’s Guide" or the "Modular RAID
Controller Installation Guide" available online at
https://support.ts.fujitsu.com/.
7.13 ODD cannot read data
Cause Troubleshooting
ODD cannot read
data
▶
Check to see whether the CD/DVD/BD is inserted
properly
. If the CD/DVD/BD is not inserted, correctly
insert the disk so that the label is facing up.
▶
Check to see whether the CD/DVD/BD is not dirty. If
the CD/DVD/BD is dirty, wipe it in a radial way with a
soft, dry cloth.
▶
Check to see whether the CD/DVD/BD is not
scratched or bent. If scratched or damaged, replace
the CD/DVD/BD.
Troubleshooting and tips
RX2540 M6 Operating Manual 103
To Next Page
Loading...
