Fujitsu PRIMERGY RX2540 M6

3.2.5 Advanced Thermal Design (ATD)
The A
TD option allows you to operate the system with a wider temperature
range either of 5 °C to 40 °C or 5 °C to 45 °C, depending on your system and
configuration.
This option can only be ordered from the
manufacturer and is indicated by the respective
logo on the identification rating plate.
CAUTION
▶
In a system that is configured with ATD, only certain components
which support the respectively increased higher operating
temperature range may be installed and used. For applicable
restrictions, see the of
ficial configurator tool.
3.2.6 Configuration Thermal Design (CTD)
The CTD option allows you to operate the system with a temperature range
from 5 °C to 30 °C with corresponding configurations.
PRIMERGY servers are designed for the usage with operating
temperatures of up to 35
°C. There could be configurations that are not
able to work within this normal operation class. Please refer to
Datasheet and Fujitsu WebArchitect ( www.fujitsu.com/configurator/
public) to obtain detailed information on the corresponding
configurations.
This option can only be ordered from the manufacturer and is
indicated by the respective logo on the identification rating
plate.
Product description
26 Operating Manual RX2540 M6