7.6 Server switches itself off
Cause Troubleshooting
Server Management
has detected an
error
▶
Check the error list of System Event Log in
ServerV
iew Operations Manager or in the iRMC web
interface, and attempt to eliminate the error.
7.7 No mouse pointer displayed on screen
Cause Troubleshooting
Mouse driver not
loaded
▶
Check whether the mouse driver is properly installed
and is activated when the application program is
started. Detailed information can be found in the user
manuals for the mouse, the operating system and the
application program.
7.8 No effect of keyboard or mouse
Cause Troubleshooting
Typing the
keyboard does not
display any
characters, or the
mouse cursor does
not move
▶
Check to see whether the keyboard and mouse are
connected properly
. If they are not connected or you
replaced them yourself, then connect the cables to
the server.
Troubleshooting and tips
100 Operating Manual RX2540 M6
To Next Page
Loading...
