Fujitsu PRIMERGY RX2540 M6

Remote Management
Controller
Integrated Remote Management Controller with
integrated video engine (iRMC S5), 512 MB DDR3
DRAM, IPMI 2.0 compatible.
Trusted Platform Module
(TPM)
Infineon / separate module; TCG V2.0 compliant,
SPI support (option)
8.7 Slots
Slot 1/2: PCIe Gen3 x16
(mechanical x16)
Low profile (LP)
Slot 3/4: PCIe Gen3 x8
(mechanical x8)
Full height/length (FHFL)
Slot 5/6: PCIe Gen3 x8
(mechanical x16)
Low profile (LP)
Slot 7/8: PCIe Gen3 x16
(mechanical x16)
Low profile (LP)
Slot 9/10: PCIe Gen3 x8
(mechanical x8)
Full height/length (FHFL)
Slot 3/9: PCIe Gen3 x16
(mechanical x16)
Full height/length (FHFL) GPGPU card support
Slot notes CPU1 supports slot 1-4
CPU2 supports slot 5-10
Slot 3/4 and Slot 9/10 or Slot 3 and Slot 9 are
only available if a riser card is installed.
Slot notes One Internal Riser PCIe Gen4 x8 slot may be
occupied with a Modular RAID controller if
configured.
Slot notes PCIe slot 1/5/6 Gen4 slot may be occupied with a
Modular RAID controller if configured.
Liquid cooling slot Liquid cooling module
Technical data
RX2540 M6 Operating Manual 109