Fujitsu PRIMERGY RX2540 M6

Status Description
blue on The server has been highlighted using ServerView
Operations Manager
, iRMC S5 web interface or the
ID button on the front panel for easy identification.
flashing blue The server has been highlighted for easy
identification using the iRMC S5 with disabled local
VGA output.
Power-on indicator / AC connected indicator (2)
Status Description
off The server is switched off and not connected to the
mains.
green on The server is switched on.
flashing white The iRMC firmware is starting up after the server has
been connected to the mains.
white on The server is switched off and connected to the mains
(standby mode).
After connecting the server to the mains, it
will take about 60 seconds until the server
will enter standby mode and can be switched
on.
exchange flashing
green and white
The server has been switched on but Power Cycle
Delay settings delay it from turning on for a specified
time.
CSS indicator (3)
Status Description
off No critical event detected (CSS component).
orange on Prefailure event detected (CSS component).
For HDDs, see also "HDD prefailure detection" on
page
37.
Product description
RX2540 M6 Operating Manual 35