Fujitsu PRIMERGY RX2540 M6

For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY RX2540 M6
Upgrade and Maintenance Manual".
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
–
iRMC S5 Firmware 1.2 or later
–
supported OOB RAID system
Indicator on the ODD
ODDs may have an indicator or not.
Figure 13: Indicator on the ODD (example)
1 Activity indicator
Activity indicator (1)
Status Description
off The ODD is inactive.
green on The storage medium is being accessed.
Product description
RX2540 M6 Operating Manual 37