Fujitsu PRIMERGY RX200 S5 - 4.3 Connecting devices to the server

50 Operating Manual RX200 S5
Connecting devices to the server Hardware installation
4.3 Connecting devices to the server
The ports for external devices are on the rear of the server. The additional ports
available on your server depend on the
options and expansion cards installed.
The standard ports are marked with symbols, and some are color-coded:
Figure 8: Ports on the rear
I Some of the devices that can be connected may require the installation
and setting up of special software (e.g. drivers) (see the documentation
for the connected device).
Ê Connect the desired devices to the server.
1 USB ports 4 Serial port COM
2 service LAN port 5 LAN port 2
3 Monitor port (blue) 6 LAN port 1 (shared with service)
햳햲 햴 햵 햶 햷햳