U41221-J-Z156-1-74 15
3 Operating and Indicator Elements
This section describes the position and meaning of the operating and indicator
elements on the PRIMERGY S60 storage subsystem.
3.1 The Front
You can see the following indicator elements on the front of the PRIMERGY
S60 storage subsystem
● The three operating status LEDs which indicate the power supply status, the
cooling status and the server management status.
● Control LEDs for the hard disk drives (two LEDs on each of the HDD
modules).
I There is a HDD Ready and a HDD Status LED for each of the 14
possible hard disk drives.
To Next Page
Loading...
