BX900 S1 Operating Manual 79
Troubleshooting and tips
7.3 System switches itself off
Server Management has detected an error
Ê Check the error list of System Event Log in ServerView Operations Manager
or in the Management Blade Web interface, and attempt to eliminate the
error.
7.4 Screen remains blank
Monitor is switched off
Ê Switch on the monitor.
Screen has gone blank
Ê Press any key on the keyboard.
or
Ê Deactivate screen saver. Enter the appropriate password.
Brightness control is set to dark
Ê Set the brightness control on the monitor to light. For detailed information,
refer to the operating manual supplied with your monitor.
Power or data cable for monitor are not connected
Ê Switch off the monitor.
Ê Check that the power cable is properly connected to the monitor and the
power outlet.
Ê Check that the data cable is properly connected to the system and the
monitor (if it is plugged in with a connector).
Ê Switch on your monitor.
To Next Page
Loading...
