Fujitsu Primergy RX300 S3 Specifications

2
1GB ECC DDR2 SDRAM FB DIMM (MAX32GB PC2 5300F)
Onboard SAS x 6 (RAID 0/1/5/1+0)
Onboard 1000 BASE-T x 2
RX300 S3
PRIMERGY RX300 S3 is a Dual Socket 2U Xeon
based Rack Server which meets expectations for an IT strat-
egy that seeks to downsize data center infrastructure costs
by enhancing transparency of structure, management over-
head and maximize the use of investments. PRIMERGY
RX300 S3 packs the capacity of a fully-featured departmen-
tal server into a rack design only 2U in height.
Offering breakthrough performance it features leading
edge Dual- or Quad-Core Intel
®
Xeon
®
5000/5100/5300
sequence CPUs embedded in a powerful design with a 6-
port SAS controller and fast PCI Express links and PCI-X
buses.
Expandability is covered for nearly any workload: 32GB
DDR2 667 SDRAM FB-DIMM memory, up to 6 SAS
hard disk drives, and sufficient free PCI slots for heavy I/O
requirements.
To guarantee its high availability, PRIMERGY RX300
S3 provides: redundant hot-plug power supply and fan op-
tions, Hot-pluggable hard disk drives, PCI Express cards
and onboard RAID. Special attention is given to high se-
curity memory data, with SDDC (Single Device Data Cor-
rection) and a memory mirroring option. With this built-
in failsafe functionality PRIMERGY RX300 S3 is ideally
suited to the demands of continuous operation in business
critical environments, running data bases, terminal servi-
ces, business applications or consolidation and virtual ma-
chine tasks.
Dual- or Quad-Core Intel
®
Xeon
®
Server —
Compact capacity for central service to your departments
Dual Core Intel
¨
Xeon
¨
Processor
5160 3GHz / 5130 2GHz
5080 3.73GHz / 5060 3.20GHz / 5050 3GHz
HDD 6Bays (MAX 880.8GB)
Redundant Power Supply*/
Redundant Fan
PCI Express x 3
PCI-X x 2 / x3*
*when option applied
Quad-Core Intel
¨
Xeon
¨
X5355 (2.66GHz)/E5310 (1.60GHz)/
Dual-Core Intel
¨
Xeon
¨
5160 (3GHz)/5130 (2GHz)/5110 (1.60GHz)
HDD 6 Bays (MAX 1.8TB)

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g