EasyManua.ls Logo

Fujitsu PRIMERGY TX200 S7 - Technical Details; Main Board

Fujitsu PRIMERGY TX200 S7
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Sheet FUJITSU Server PRIMERGY TX200 S7 Dual socket Intel® Xeon® processor tower server
Page 3 / 10 www.fujitsu.com/fts
Technical details
PRIMERGY TX200 S7
Base unit PRIMERGY TX200 S7 PRIMERGY TX200 S7 PRIMERGY TX200 S7 PRIMERGY TX200 S7
Housing types Tower Tower Tower Tower
Storage drive architecture 3.5-inch 3.5-inch 2.5-inch 2.5-inch
Power supply Standard Hot-plug Standard Hot-plug
Mainboard
Mainboard type D 3099
Chipset Intel® C602
Processor quantity and type 1 - 2 x Intel® Xeon® processor E5-2400 product family
Processor Intel® Xeon® processor E5-2403
(4C/4T, 1.80 GHz, TLC: 10 MB, Turbo: No, 6.4 GT/s, Mem bus: 1,066 MHz, 80 W)
Intel® Xeon® processor E5-2407
(4C/4T, 2.20 GHz, TLC: 10 MB, Turbo: No, 6.4 GT/s, Mem bus: 1,066 MHz, 80 W)
Intel® Xeon® processor E5-2420
(6C/12T, 1.90 GHz, TLC: 15 MB, Turbo: Yes, 7.2 GT/s, Mem bus: 1,333 MHz, 95 W)
Intel® Xeon® processor E5-2430
(6C/12T, 2.20 GHz, TLC: 15 MB, Turbo: Yes, 7.2 GT/s, Mem bus: 1,333 MHz, 95 W)
Intel® Xeon® processor E5-2430L
(6C/12T, 2.00 GHz, TLC: 15 MB, Turbo: Yes, 7.2 GT/s, Mem bus: 1,333 MHz, 60 W)
Intel® Xeon® processor E5-2440
(6C/12T, 2.40 GHz, TLC: 15 MB, Turbo: Yes, 7.2 GT/s, Mem bus: 1,333 MHz, 95 W)
Intel® Xeon® processor E5-2450
(8C/16T, 2.10 GHz, TLC: 20 MB, Turbo: Yes, 8.0 GT/s, Mem bus: 1,600 MHz, 95 W)
Intel® Xeon® processor E5-2470
(8C/16T, 2.30 GHz, TLC: 20 MB, Turbo: Yes, 8.0 GT/s, Mem bus: 1,600 MHz, 95 W)
Memory slots 12 (6 DIMMs per CPU, 3 channels with 2 slots per channel)
Memory slot type DIMM (DDR3)
Memory capacity (min. - max.) 2 GB - 192 GB
Memory protection Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support
Memory notes max.192 GB registered; min. 2 GB unbuffered; Memory Mirroring with identical modules in both channel pairs of a bank
(2 modules per bank). Rank sparing with identical modules within the same channel. Performance Mode with identical
modules in all channels of each bank per CPU.
Memory options 4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1,600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1,600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1,600 MHz, PC3-12800, DIMM
Memory options 4 GB (1 module(s) 4 GB) DDR3 LV, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM
Interfaces
USB 2.0 ports 9 x USB 2.0 (2 x front USB, 4 x rear USB 3 x internal for backup, UFM and internal USB)
Graphics (15-pin) 1 x VGA
Serial 1 (9-pin) 1 x serial RS-232-C (9 pin), usable for iRMC S3 or system or common use
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet (Intel Hartwell)
Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Management LAN trafc can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller additional RAID controller options are described under Components RAID controller

Other manuals for Fujitsu PRIMERGY TX200 S7

Related product manuals