Replacing the Pick Roller
(1) Open the ADF top section.
(2) Open the Guide-P-ASSY (sheet guide).
1. Slide the side guides all the way.
2. Pull the Guide-P-ASSY (sheet guide) open from the dip.
(3) Rotate the bushing on the Pick-Roller-ASSY in the direction of the arrow (see the lower left figure).
(4) Gently lift the right side of the bushing (about 5 mm) (①), move it towards the right, and then pull it out. (②)
Notice
Be careful not to touch the gear near the bushing as it contains grease.
When the ADF is open, it might close accidentally. Be careful not to get your fingers
caught.
To Next Page
Loading...
