Fujitsu ScanSnap iX500 Safety Precautions

4
Do not use the power cable or the USB bus power cable if it is damaged. Also, do not
insert any cables or power plugs into loose sockets. Doing so may cause a fire or
electric shock.
Be careful of the following when handling the power cable or the USB bus power
cable:
 Do not moisten, modify, tie, bundle, or wind the cable.
 Do not place heavy objects on the cable, trap the cable in a doorway, drop or
damage the cable in any other way.
 Do not pull or forcibly bend or twist the cable.
 Do not place any metal near to the plug of the power cable.
If the power cable or the USB bus power cable is damaged, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
Do not place heavy objects on the ScanSnap or perform other work on top of the
ScanSnap. Doing so might cause injuries or an equipment failure.
Do not use the ScanSnap or AC adapter while covered with a blanket, etc. Doing so
may raise the temperature inside and cause a fire.
To avoid injuries, be careful not to get your clothing (e.g., ties, necklaces) or hair
caught inside the ScanSnap.
Do not use the ScanSnap while driving a car. Doing so may prevent you from driving
carefully, which can cause an accident.
Do not touch the heated section such as the bottom of the ScanSnap or AC adapter
for a long time. Doing so may cause a low-temperature burn on your skin.
When the ScanSnap is not going to be used for a long period of time, be sure to
disconnect the power cable from the AC outlet or the USB bus power cable from the
computer. Not doing so may cause a fire or electric shock.
Before you perform cleaning, you must turn off the ScanSnap and unplug the power
cable or the USB bus power cable to avoid the risk of fire or electric shock.
Do not use any aerosol sprays or alcohol based sprays to clean the ScanSnap. Dust
blown up by strong air from the spray may enter the inside of the ScanSnap. This
may cause the ScanSnap to fail or malfunction. Sparks, caused by static electricity,
generated when blowing off dust and dirt from the outside of the ScanSnap may
cause a fire.

Fujitsu ScanSnap iX500 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 863 mm
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Scanner type	ADF scanner
Product color	Black
Scan to	File, Image
Sensor type	CIS
Scan file formats	JPG, PDF
Daily duty cycle (max)	- pages
Standard input capacity	50 sheets
Maximum scan area (ADF)	216 x 360 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Plain paper, Post Card(JPN)
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	40 - 209 g/m²
USB version	3.2 Gen 1 (3.1 Gen 1)
Standard interfaces	USB 1.1, USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1), Wireless LAN
Mac operating systems supported	Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Input voltage	100-240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	2.5 W
Power consumption (typical)	20 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR
Certification	RoHS
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	159 mm
Width	292 mm
Height	168 mm
Weight	3000 g